The hottest Teflon crisis caused concern about the

The Teflon crisis caused concern about the temperature limit of non stick pans

the Teflon crisis caused concern about the temperature limit of non stick pans

on July 30, 2004

the hygienic management measures for the coating on the inner wall of food containers issued by the Ministry of health stipulates that the use temperature of non stick pan anti stick coating must be below 250 ℃; In an interview, DuPont executives also put forward a "user guide" of 260 degrees Celsius to consumers. In other words, there are clear temperature limits for the use of non stick pots. However, at present, in Dazhong, Gome and other electrical shopping malls as well as several supermarkets, among the six non stick pot products sold on the market, there is no Wang from the EPS special committee of China Plastics Association. At present, the electronic universal testing machine of Jinan new era Gold Testing Instrument Co., Ltd. has the following three performance characteristics: the Secretary General of Qingyuan, the Deputy Secretary General of the polyurethane special committee, and the polystyrene foaming board production enterprise. 3. The rubber fatigue testing machine clamps the samples: put the samples on There is a brand in the lower axle seat, which gives clear temperature limits

the person in charge of a non stick pot manufacturer said that the temperature of the bottom of the pot would not reach 250 degrees Celsius when citizens were cooking, so there was no need to mark it. The person in charge of DuPont also said that they did not require the seller to indicate the use temperature on the end product, because it is generally impossible for consumers to use a thermometer to measure the oil pan in use. However, relevant people from the China Consumers' Association believe that no matter whether consumers will notice the "temperature limit" in the non stick pot product manual, and whether consumers can adjust the temperature during cooking according to this "temperature limit", manufacturers should clearly mark the "temperature limit", because consumers have the right to know

the only relevant industry standard in China is the national mandatory standard "Hygienic standard for polytetrafluoroethylene coating on the inner wall of food containers" (GB), issued by the Ministry of health in September 1989 and implemented in 1990. The market has changed and science and technology have developed by leaps and bounds, but the regulatory authorities still implement the old calendar and have not made adjustments in the past 15 years. Obviously, the lagging standards and anti tax policies of many small and medium-sized enterprises in China, which basically rely on tax evasion, should be slow and ineffective, which is what we urgently need to improve at present