Measures for the administration of the hottest ind

2022-08-12
  • Detail

Article 1 in order to strengthen the management of industry standards, ensure the coordination and unification of industry standards, and jointly develop new energy all aluminum electric vehicles and buses, these measures are formulated in accordance with the provisions of the standardization law of the people's Republic of China and the regulations for the implementation of the standardization law of the people's Republic of China

the second industry standard is the standard formulated for the technical requirements that need to be unified within a certain industry in the country without national standards. Industry standards shall not conflict with relevant national standards. Relevant industry standards should be coordinated and unified, and no repetition is allowed. Industrial standards shall be abolished immediately after the implementation of corresponding national standards

Article 3 the following technical requirements that need to be unified within the industry can be formulated in industry standards (including the production of standard samples):

(I) technical terms, symbols, codes (including codes), file formats, drawing methods and other general technical languages

(II) varieties, specifications, performance parameters, quality indicators, test methods and safety and health requirements of industrial and agricultural products. The principle of the wheel wrench strength and endurance fatigue testing machine is: the upper servo motor drives the reducer to rotate (the lifting mechanism is a servo motor reducer;

(III) design, production, inspection, packaging, storage, transportation, use, maintenance methods, production, storage Safety and health requirements during transportation

(IV) technical requirements for general parts

(V) product structure elements and exchange and coordination requirements

(VI) technical requirements and methods for survey, planning, design, construction and acceptance of engineering construction

(VII) technical requirements for information, energy, resources, transportation and management technology

Article 4 industry standards are divided into mandatory standards and recommended standards. The following standards are mandatory industry standards:

(I) pharmaceutical industry standards, veterinary industry standards, pesticide industry standards, and food hygiene industry standards

(2) industrial and agricultural products and safety and health industry standards in the production, storage, transportation and use of products

(III) industrial standards for quality, safety and health of engineering construction

(IV) important technical terms, symbols, codes (including codes), document formats and drawing methods related to technical convergence industry standards

(V) exchange and cooperate with industry standards

(VI) general test methods, inspection methods and important industrial and agricultural product industry standards that need to be controlled within the industry. Other industry standards are recommended industry standards

Article 5 the industrial standards for product quality, where it is necessary and possible to grade, should make reasonable grading provisions

Article 6 industrial standards are under the unified management of the centralized Department of industrial standards. The competent administrative department of the State Council shall submit an application report to the competent administrative department of the State Council for examination and determination, and publish the industry standard code of the industry

Article 7 when formulating the plan of industrial standards, the centralized Department of industrial standards must coordinate with the relevant administrative departments to establish a scientific and reasonable standard system

Article 8 in the work of formulating industry standards, the centralized Department of industry standards shall perform the following duties:

(1) formulate the industry standard plan of the industry

(II) be responsible for coordinating the division of labor of industry standard projects of relevant administrative departments

(III) organize the formulation of industry standards for the industry

(IV) unified examination and approval, numbering and issuance of industry standards of the industry

(V) handle the filing of industrial standards

(VI) organize the review of industry standards of the industry

Article 9 the National Professional Standardization Technical Committee or the centralized unit of professional standardization technology is responsible for putting forward suggestions on the plan of industrial standards, and organizing the drafting and review of industrial standards. The suggestion that the tensile strength value of the mixed composite materials in the industry standard plan proposed by the National Professional Standardization Technical Committee or the Specialized Standardization Technical centralized unit is 248mpa is issued and implemented by the relevant administrative departments after the coordination and division of labor between the industry standard centralized department and the relevant administrative departments

Article 10 the role of industry associations, scientific research institutions and academic groups should be brought into play in formulating industry standards. The Department that formulates the standards shall involve them in the drafting and examination of the standards

Article 11 the plan of industrial standards shall be copied by the centralized Department of industrial standards to the Standardization Administration Department of the State Council in duplicate

Article 12 according to the arrangement of the industry standard plan, the drafting unit of the industry standard is responsible for proposing the draft of the industry standard for comments, which is revised into the draft for examination after soliciting the opinions of all relevant parties, and is sent to the National Professional Standardization Technical Committee or the centralized unit of professional standardization technology

Article 13 the draft of industry standards for examination shall be organized and examined by the National Professional Standardization Technical Committee or the specialized standardization technology centralized unit entrusted by the industry standards centralized department. The review organized by the National Professional Standardization Technical Committee shall be carried out in accordance with the provisions of the articles of association of the National Professional Standardization Technical Committee. When the review is organized by the specialized standardization technology centralized unit, the personnel participating in the review should be relevant experts from production, use, distribution, scientific research, institutions of higher learning and other units. Among them, the personnel in use should not be less than one quarter. The industry standard review can adopt meeting review or letter review. During the review of the meeting, full discussion shall be conducted to reach an agreement as far as possible. When voting is required, it must be approved by not less than three fourths of the representatives attending the meeting. During the letter review, three fourths of the replies must be approved. Minutes of the meeting shall be written for the review results of the meeting. The meeting minutes shall truthfully reflect the opinions of all parties. During the letter review, the "letter review conclusion" (format according to Annex 2) shall be written and attached with the "letter review sheet" (format according to Annex 3). The attendance rate of the conference representatives and the reply rate of the letter review sheet shall not be less than two-thirds. When the industrial standard is submitted for approval, it shall be attached with "standard draft for approval", "standard preparation instructions", "opinion summary and processing table" (format according to Annex 1) and other relevant attachments

Article 14 industrial standards shall be approved, numbered and issued by the centralized Department of industrial standards. When submitting industrial standards for approval, there should be "draft of standard for approval", "description of standard preparation", "minutes of standard review meeting" or "letter review conclusion" and its "letter review sheet", "opinion summary and processing table" and other relevant attachments. When adopting international standards or foreign advanced standards, the original text or translation of the standard shall be attached. The approval of industry standards must respect the "minutes of review meeting" or "letter review conclusion". There should be sufficient scientific evidence for revising the draft submitted for approval, and the opinions of the National Professional Standardization Technical Committee or the centralized unit of professional standardization technology should be solicited. In case of major amendments to the draft submitted for approval, it shall be re examined. To determine the mandatory or recommendatory nature of industry standards, the National Professional Standardization Technical Committee or the specialized technical centralized unit for the restoration of standardization shall put forward opinions, which shall be examined and approved by the industry standard centralized department

Article 15 after the implementation of industrial standards, they should be reviewed in due time according to the needs of scientific and Technological Development and economic construction; Generally, the review cycle shall not exceed five years, and it shall be determined to continue to be valid, revised or abolished. The review of industrial standards shall be carried out by the National Professional Standardization Technical Committee or the centralized unit of professional standardization technology organized by the centralized Department of industrial standards. The review of industry standards can also adopt meeting review or letter review. Generally, units and personnel who have participated in the review of the standard shall participate in the review. After the standard review, a "review report" shall be submitted to the industry standard centralized department for approval

Article 16 the codes of industrial standards shall be prescribed by the Standardization Administration Department of the State Council. The number of industry standard consists of industry standard code, standard sequence number and year number

(I) mandatory industry standard number---- ××××--××

(II) recommended industry standard number ----/t ××××--××

Article 17 the centralized Department of industrial standards shall, within 30 days after the issuance of industrial standards, submit a copy of the issued industrial standards and the compilation instructions together with the issued documents to the Standardization Administration Department of the State Council for the record. If the filed industrial standards violate relevant national laws, regulations and mandatory national standards, the Standardization Administration Department of the State Council shall instruct the centralized Department of industrial standards to make corrections within a time limit or stop implementation

Article 18 the compilation of industrial standards shall comply with the provisions of the national standard GB1 "guidelines for standardization work", and the publication of industrial standards shall be determined by the competent department of industrial standards. The official text of the published industry standard shall be submitted to the Standardization Administration Department of the State Council in quintuplicate

Article 19 industrial standards are scientific and technological achievements. Industrial standards with high technical level and remarkable benefits should be included in the scope of scientific and technological progress awards of the state or the relevant administrative departments of the State Council and rewarded

Article 20 the State Bureau of technical supervision is responsible for the interpretation of these measures

Copyright © 2011 JIN SHI