Publicity and implementation of the implementation

2022-07-29
  • Detail

Detailed rules for the implementation of production license for hazardous chemical coating products It was implemented on February 29th, 2008. See Annex 1 for the specific licensed products. In order to conscientiously publicize and implement the implementation rules, provide guarantee for the production license issuance of coating products, and ensure that the task of obtaining 100% certificates for coating manufacturers is completed by the end of October 2008, after research, it is decided to hold the third phase of the implementation rules publicity and implementation meeting in Changzhou City, Jiangsu Province. The unit receiving the notice must send responsible comrades to attend the meeting on time. The relevant matters of the publicity and implementation meeting are hereby notified as follows

I. meeting time and place

1. Check in date: April 14, 2008

2. Meeting date: from 9:00 a.m. on April 15, 2008

3. Meeting place: Lijing Holiday Inn Changzhou (No. 80, Guanhe West Road, Changzhou City)

contact person: Miss Xu ()

hotel contact:

II. Others:

1. There is no transfer arrangement for the meeting, Route to the meeting place by oneself:

Airport: take the civil aviation shuttle bus to the railway station, and transfer to a bus or taxi

train station or bus station: take bus No.1, No.18, No.21, No.57, No.59 to the agricultural, industrial and commercial supermarket station, and take a taxi at the train station or bus station for about 9 yuan

2. The conference representatives shall pay 700 yuan of conference service fee, and uniformly arrange board and lodging during the conference at their own expense. In order to facilitate accommodation and return arrangements, participants are requested to fill in the meeting receipt (see Annex 2) and fax it to the undertaker of the meeting: National Paint Quality Supervision and inspection center before April 7, 2008. Contact persons for the meeting: Yang Jing, Su Chunhai

:,

Fax:

Annex: 1. Details of certification products

receipt of the publicity and implementation meeting of the detailed rules for the implementation of phase III hazardous chemical paint products

remarks: if you need to book a return ticket, Please write down the specific requirements here or contact the conference contact person directly.

the representatives participating in the conference must fill in the receipt and fax it to the National Paint Quality Supervision and inspection center before april7,2008

Fax:

March 27, 2008

copy: the sphere radius of the national industrial product production license office and the full 4.3.2 headform should be 95 ± 1mm

copy: Jiangsu and Anhui production license offices

Product details of the production license of hazardous chemical coating products

composed of oil modified alkyd resin, desiccant, xylene Alkyd baking insulating paint prepared from sh0005 paint solvent oil and alkyd baking insulating paint prepared from dry vegetable oil modified alkyd resin and xylene, accounting for 1/10 of China's raw material consumption

acrylic varnish prepared by dissolving Methacrylate Methacrylic acid copolymer resin in organic solvent and adding an appropriate amount of additives

acrylic varnish prepared by dissolving Methacrylate Methacrylic acid copolymer resin and amino resin in organic solvent and adding an appropriate amount of additives

various phenolic enamel prepared by mixing dry vegetable oil and rosin modified phenolic resin, grinding with pigments and body pigments, adding driers and using sh0005 paint solvent oil or turpentine

rosin modified phenolic resin, polyol rosin ester, dry vegetable oil Various colors of phenolic antirust paint prepared from pigments, body pigments, driers and organic solvents

amino resin and oil modified alkyd resin diluted with xylene and butanol, and then added with non floating aluminum powder or various hammer paint pastes

various colors of amino baking hammer paint prepared from nitrocellulose, alkyd resin (or an appropriate amount of other synthetic resin), various pigments Various colors of nitro exterior enamel prepared by plasticizers and organic solvents

various colors of nitro putty prepared by synthetic resins such as nitrocellulose and alkyd resin, plasticizers, pigments, physical pigments and organic solvents

polyvinyl butyral resin is dissolved in alcohol solvents and grinded with antirust pigments, The zinc yellow and iron red perchloroethylene primers prepared by electronic measurement of ethylene peroxide resin and alkyd resin under various test conditions, plasticizers, pigments, physical pigments and mixed organic solvents are easily and accurately realized Various colors of perchloroethylene enamel prepared by physical pigments (semi gloss enamel) and organic mixed solvents

various colors of perchloroethylene anticorrosive paint prepared by peroxy vinyl resin, alkyd resin, various colors of pigments, plasticizers and organic solvents

various colors of epoxy ester putty prepared by epoxy resin, vegetable oleic acid, pigments, physical pigments, driers, xylene, butanol and other organic solvents

chlorinated rubber primer, intermediate paint and topcoat are made by using chlorinated rubber as paint base and adding other synthetic resins, pigments and solvents

Copyright © 2011 JIN SHI